
Matrix_SEN103510 | 98-0040110 | Version 1.0
Plant Monitoring
EN
A display area is made up of modules on the Sunny Matrix. A module consists of 4 positions. The
Sunny Matrix can display a character at each of these positions. You can compile display areas
with different lengths of these modules and positions. The Sunny Matrix modules are always
numbered from left to right, from top to bottom. The numbering is required for compiling the
display areas.
Display areas are already predened before shipping the Sunny Matrix and noted for you on the
conguration sheet included in the delivery.
Normally every line with modules is predened as a display area. The following example shows
the normally predened display areas of a Sunny Matrix with 2 lines, with 4 modules, each.
The following display areas are to be dened:
• A display area is to be saved as and made up of the following modules: module 1 with
positions 1 to 4, module 2 with positions 1 and 2.
• A display area is to be saved as and made up of the following modules: module 2 with
positions 3 to 4, module 3 with positions 1 to 4 module 4 with positions 1 to 4.
Select
In the “Denable displays“ area select [7].
Dening the display area:
Activate the rst selection eld and select the following settings in the drop-down lists:
“Module“ , “Start“ , “Length“ .
Activate another selection eld and select the following settings in the drop-down lists:
“Module“ , “Start“ , “Length“ .
Select [Save].
In the “Denable displays“ area select [8].
Dening the display area:
Activate the rst selection eld and select the following settings in the drop-down lists:
“Module“ , “Start“ , “Length“ .
Activate another selection eld and select the following settings in the drop-down lists:
“Module“ , “Start“ , “Length“ .
Activate another selection eld and select the following settings in the drop-down lists:
“Module“ , “Start“ , “Length“ .
Select [Save].
Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de
Inverters: +49 561 9522 1499
Communication: +49 561 9522 2499
Fax: +49 561 9522 4699
If you have technical problems concerning our products, contact the SMA Serviceline. We
require the following information in order to provide you with the necessary assistance:
• Type of inverter
• Type of communication interface between Sunny WebBox and the inverters
• Sunny Matrix rmware version
• Sunny Matrix serial number of the system board
• Sunny Matrix serial number
Numbering of modules and positions:
Module
Position
Kommentare zu diesen Handbüchern