Sma Anemometer Bedienungsanleitung PDF herunterladen (Seite 8)

Mounting the Device SMA Solar Technology AG

8 Windsensor-IEN101010 Installation Guide

4 Mounting the Device

4.1 Mounting the anemometer on a mast

1. Determine the mounting position taking into

consideration the requirements of the mounting

location.

2. Attach the mounting angle using the enclosed

clamp at the top end of the mast (see ➀ ).

3. Place anemometer with the screws in the wide

recesses of the mounting angle (see ➁ ) and rotate

the anemometer up to the end of the narrow recess

(see ➂ ).

4. Tighten the screws below the anemometer.

5. Attach cables closely to the mast using cable ties or

similar attaching material.

☑ The anemometer is mounted.

4.2 Mounting the anemometer on a wall

4.2.1 Wall Mounting with Mounting Angle

1. Determine the mounting position taking into

consideration the requirements of the mounting

location.

2. Attach the mounting angle on the lateral end of the

wall using screws and screw anchors (see ➀ ).

3. Place the anemometer including screws into the

wide recesses of the mounting angle (see ➁ ) and

rotate the anemometer to the end of the narrow

recesses (see ➂ ).

4. Tighten the screws below the anemometer.

5. Lay cables on the wall.

☑ The anemometer is mounted.

If the anemometer is mounted directly on the wall, turbulence may occur, which reduces

the precision of measurements.

We recommend using a wall mounting bracket for wall mounting (see chapter4.2.2”Wall

Mounting with Wall Mounting Bracket” (page9)). The wall mounting bracket enlarges the

distance to the wall and avoids turbulence. The accuracy of measurements is increased.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Sma Anemometer Bedienungsanleitung Seite 8